COMPACT, TOUGH AND RELIABLE An outstanding value for trucks, sport utility vehicles and Jeeps. The M8000, with its 4.8-hp Series Wound motor and 3-stage planetary geartrain, packs 8,000 lbs. of pulling power to get the job done. Pulls a fast 8 ft. per minute at rated load.
| M8000 SPECS | | Part Number: 26502 (12V) | | Rated Line Pull: 8,000 lbs. (3630 kgs) single-line | | Intended Use/Application: Vehicle Recovery / For Trucks and SUVs | | Motor: Series Wound, 12V 4.8 hp | | Remote Control: Remote Switch, 12' (3.7m) lead | | Geartrain: 3-Stage Planetary | | Gear Ratio: 216:1 | | Lubrication: Aeroshell #17 | | Clutch (freespooling): Sliding Ring Gear | | Brake: Automatic Direct Drive Cone | | Wire Rope: 100', 5/16" diameter (30m, 8mm diam.) | | Fairlead: Roller | | Recommended Battery: 650 CCA minimum for winching | | Battery Leads: 2 gauge, 72" (1.83m) | | Finish: Argent Gray Powder Coat | | Drum Diameter/Length: 2.5"/9.0" (6.4cm/23cm) | | Weight: 74 lbs. (34 kgs.) | | Replacement Parts List
Users Manual
Winching Techniques |
| 12V DC PERFORMANCE SPECS | Line Pull
Lbs.(Kgs.) | Line Speed
FT./min(M/min.) | Motor
Current | Pull by layer
layer/Lbs(Kgs.) | | 0 | 42(12.8) | 80 amps | 1/8000(3629) | | 2000(907) | 16(4.88) | 200 amps | 2/7280(3302) | | 4000(1814) | 11.9(3.63) | 285 amps | 3/6670(3026) | | 6000(2721) | 9.79(2.98) | 350 amps | 4/6230(2826) | | 8000(3628) | 8.01(2.44) | 435 amps | | | |
| Above performance specs are based on first layer of drum. | |
