ULTIMATE PERFORMANCE WITH OPERATOR FEEDBACK The 9.5ti Multi-Mount packs 9500lbs of portable pulling capacity into a massive 12.5lb aluminum die-cast body. The new shape not only looks great, but sheds the elements like no other winch on the market: seals at the key points give extreme-duty water resistance. A Gen II Bosch motor delivers just the right balance between torque and speed. Plus another Warn Industries first - operator feedback - the thermometric indicator gives the operator information about motor temperature during the winching operation.
The 9.5ti Multi-Mount includes winch and carrier, wiring for the front of vehicle. Includes remote with integrated flashlight. Front receiver and rear power lead sold separately.
| 9.5ti MULTI-MOUNT SPECS | | Part Number: 65735 (12V) | | Rated Line Pull: 9,500 lbs. (4310 kgs) single-line | | Intended Use/Application: Vehicle Recovery / For Trucks and SUVs | | Motor: Gen II, Series Wound | | Remote Control: Remote, 12' (3.7m) lead, thermometric indicator, S2 elements, integrated flashlight | | Geartrain: 3-Stage Planetary | | Gear Ratio: 156:1 | | Lubrication: Aeroshell #17 | | Clutch (freespooling): Sliding Ring Gear | | Brake: Automatic Direct Drive Cone | | Wire Rope: 125', 5/16" diameter (38m, 8mm diam.) | | Fairlead: Hawse | | Recommended Battery: 650 CCA minimum for winching | | Battery Leads: Front heavy-duty 7.5'/2.2m with quick connect plug | | Finish: High-gloss Argent Gray Powder Coat | | Drum Diameter/Length: 2.5"/9.0" (6.4cm/23cm) | | Weight: 112 lbs. (51 kgs.) | | Replacement Parts List
Users Manual
Winching Techniques |
| 12V DC PERFORMANCE SPECS | Line Pull
Lbs.(Kgs.) | Line Speed
FT./min(M/min.) | Motor
Current | Pull by layer
layer/Lbs(Kgs.) | | 0 | 62(18.9) | 47 amps | 1/9500(4313) | | 2000(907) | 16.3(4.97) | 160 amps | 2/8650(3927) | | 4000(1814) | 11.8(3.60) | 230 amps | 3/7920(3595) | | 6000(2721) | 9.31(2.84) | 305 amps | 4/7400(3359) | | 8000(3630) | 7.59(2.31) | 370 amps | 5/6940(3150) | | 9500(4310) | 6.67(2.03) | 425 amps | | | |
| Above performance specs are based on first layer of drum. | |
